Switching Regulators Raise Power Bars

Oct. 8, 2008
The NCP3101 and NCP3102 switching regulators promise to simplify embedded power designs by integrating 6A and 10A synchronous switching regulators and provide a level of integration that will allow users to replace dc/dc modules with embedded designs

The NCP3101 and NCP3102 switching regulators promise to simplify embedded power designs by integrating 6A and 10A synchronous switching regulators and provide a level of integration that will allow users to replace dc/dc modules with embedded designs to reduce system cost while increasing power density. NCP3102 is a 10 A synchronous switching regulator that enables power conversion from a 5V or 12V supply. Integrated 8-milliOhm high-side and low-side FETs contribute to efficiencies greater than 92% for typical buck applications. It also packs a voltage reference of 0.8V for sub 1V operation. With a 6A rating, the NCP3101 is pin-for-pin compatible with and otherwise identical to the NCP3102. Other shared features, include programmable soft-start, cycle-by-cycle current limit, programmable current limit, and both regulators are available in 6 mm x 6 mm QFN packages. Prices for the NCP3102 and NCP3101 are $1.90 and $1.75 each/10,000, respectively. ON SEMICONDUCTOR, Phoenix, AZ. (800) 282-9855.

Company: ON SEMICONDUCTOR

Product URL: Click here for more information

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!