TempTraq, a smart bandage integrated with low-power Bluetooth circuits and sensors to measure a baby's temperature, is one example of using flexible batteries to introduce new wearable technologies. (Image courtesy of TempTraq via PRNewswire).

IoT Devices and Wearables Push Development of Thin, Flexible Batteries

Sept. 18, 2015
The demand for flexible batteries is expected to increase significantly in the next few years, with manufacturers using them to introduce new wearable electronics and IoT devices.

The evolution of wearable electronics and Internet of Things (IoT) devices will increasingly require battery attributes such as thinness, flexibility, light weight, and low charging thresholds. The demand for batteries with these unique parameters is expected to increase significantly over the next few years, as manufacturers begin using them to not only differentiate current products, but also to introduce new product categories.

The market for printed and flexible batteries, which earned revenues of only $6.9 million in 2014, is expected to reach $400 million in 2025, according to a recent report from IDTechEx Research. The market is being supported by several large corporations, such as Apple and Samsung, which have moved into the development of flexible batteries used in wearable technology.

In 2013, the U.S. Patent and Trademark Office published a patent from Apple that outlined a flexible battery pack, designed to “allow the battery to be shaped to fit a form factor of the electronic device.” Later that year, LG Chem revealed a small cable-shaped battery that is capable of being tied in a knot. At the 2014 InterBattery convention, Samsung SDI unveiled a pliable battery that closely resembled a stick of chewing gum.

The projected distribution of revenues in the market for thin film, printed, and flexible batteries in 2025. (Table courtesy of IDTechEx Research).

These kinds of batteries have had limited commercial success in recent years, due to the higher cost, lower capacity, and shorter lifespan when compared to traditional coin-cell batteries. Raghu Das, CEO of IDTechEx and a senior analyst of printed electronics, said that printed and flexible batteries would not succeed merely as “a replacement versus cheaper, higher-performing incumbents,” especially in the consumer electronics market. Instead, he urged that this technology would support low-cost, low-power products in markets such as disposable medical devices, passive RFID, skin patches, medical sensors, backup power, wireless sensors, and smart cards.

The report cited several early developments in the IoT ecosystem made possible by flexible batteries. Earlier this year, Qualcomm revealed a new product concept with the support of printed-battery company Enfucell—a sensing label for golfers that transmits club speed and other data to a smartphone. In another recent example, Blue Spark Technologies introduced a smart bandage called TempTraq, which sends a child's temperature to a smartphone via a low-energy Bluetooth circuit and sensor powered by a flexible battery.  

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!