Teseq's CDN HSS-2 is compact, relatively lightweight and easy-to-use. It features selectable common mode coupling to 1, 2 or 4 pairs depending on the jumper settings on the CDN, and is coupled with 40 ohm in series with a coupling capacitor.
The new network features a maximum surge test voltage of 2 kV with a maximum peak surge test current of up to 50 A and a maximum residual voltage at the auxiliary equipment (AE) of only 65 V.
The device has a maximum operating speed of 1000 BaseT, maximum operating voltage of 100 VDC between pairs and maximum operating current of 1 A that is rated for power over Ethernet (PoE). Additional decoupling elements are not required to protect the AE. The unit's high decoupling provides the AE independent pulse shape for the EUT.
The new CDN HSS-2 weighs approximately 15 kg (33 lbs) and is 200 mm (7.8") wide, 200 mm (7.8") high and 470 mm (18.5") deep.