Latching Control Guards Against Y2K Type Conditions

Jan. 1, 2000
Available on all of firm’s applicable power distribution systems and mating remote control panels, remote ON/OFF and emergency power OFF are provided through the PDU industry-standard 3-pin I/O remote port to guard against Y2K type conditions

Available on all of firm’s applicable power distribution systems and mating remote control panels, remote ON/OFF and emergency power OFF are provided through the PDU industry-standard 3-pin I/O remote port to guard against Y2K type conditions such as severe brown-out and black-out fluctuations. Remote start requires a maintained closure between pins 2 and 3 and momentary closure between pins 1 and 3. Opening the closure between pins 2 and 3 shuts down the PDU immediately. Resetting the EPO switch will not power the PDU ON after an emergency shutdown. The user must give the unit a momentary start as a second power up step. This two-step process prevents sudden unmanned start-up of sensitive or dangerous equipment. If the remote control switch is accidentally disconnected from the PDU, the PDU will also shutdown and will not power ON until the connection is restored and the PDU is restarted. This prevents a situation where the user might not know that the EPO had been disconnected and would not operate in an emergency situation. Additional features of the firm’s PDU include EMI/RFI filtering, spike/surge protection, proprietary multiple time delay power up and/or power down sequencing, automatic voltage sensing and switching, dual input with primary to secondary power switching, and single- and three-phase power. Configurations include PDUs with NEMA, MIL or IEC 60320 connectors.

Company: PULIZZI ENGINEERING INC.

Product URL: Click here for more information

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!