Low Input Voltage SIP Mini POL Converters

Jan. 12, 2011
FDK Corporation extends its DK Series of non-isolated, point-of-load (POL) dc-dc converters with the addition of three new converters that operate from a 3.0Vdc to 5.5Vdc input bus.

FDK Corporation extends its DK Series of non-isolated, point-of-load (POL) dc-dc converters with the addition of three new converters that operate from a 3.0Vdc to 5.5Vdc input bus. These very small, low profile single-in-line package (SIP) devices deliver up to 3, 4, and 6 Amperes (A) of output current with efficiencies up to 94%. They provide a tightly regulated programmable output voltage in the range of 0.8Vdc to 3.465Vdc. The 3A and 4A models deliver the full rated output current with no derating in ambient temperatures up to 85 and 75 degrees Celsius respectively under natural convection. The 6A converter delivers the full rated output current with no derating up to 60°C with 400LFM (2m/s) airflow.

FDK's 3A model FPDK05TR8003PSV and the 4A model FPDK05TR8004PSV are offered in a 0.394"W x 0.185"D (10.0 x 4.7mm) SIP package. The 6A model FPDK05TR8006PSV is offered in a 0.394"W x 0.220"D (10.0 x 5.6mm) SIP package. Occupying a footprint of less than 0.08 in.2 (0.5cm2)for the 3A and 4A models, and 0.09 in2 (0.6cm2) for the 6A model, they provide significant space savings over discrete on-board solutions. All models have a low height of 0.472" (12.0mm), making them particularly suitable for high density racks, blade systems, and low profile consumer applications with limited board-to-board and board-to-case clearances.

The DK Series converters provide complete power conversion solutions without the need for external input and output capacitors. They are true single input converters in that they do not require an external Vcc (bias) supply for operation. They feature programmable output voltage, remote ON/OFF, over-current and over-temperature protection, and start up into a pre-biased output. They fit a wide range of telecommunications, data communications, computing, industrial, and consumer applications where board space, cost, profile, efficiency, and reliable operation in elevated temperature environments are critical.

All DK Series products are RoHS compliant. They are manufactured using FDK's state-of-the-art in-house manufacturing processes and systems in Japan. In quantities of 1,000 pieces, the FPDK05SR8003PSV is priced at $5.00, the FPDK05SR8004PSV at $5.50, and the FPDK05SR8006PSV is priced at $6.00. Lead time is 8 weeks.

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!