More Memory, Lower Power Enhance TM32 Microcontrollers

STMicroelectronics has extended its STM32 L1 series of ultra-low-power ARM® Cortex®-M3 32-bit microcontrollers with new 512KB flash devices.
June 9, 2014
2 min read

STMicroelectronics has extended its STM32 L1 series of ultra-low-power ARM® Cortex®-M3 32-bit microcontrollers with new 512KB flash devices. The L1 series now includes more than 70 part numbers in three lines that offer the market-unique combination of ultra-low power consumption and memory size up to 512 KB of Flash and 80 KB of RAM.

Offering outstanding low-power operation via ST's new, proprietary ultra-low-leakage 110nm CMOS process and optimized architecture, the new devices target cost-efficient embedded designs in connected and battery-operated applications in fitness, healthcare, wearable, and industrial/metering domains..

Key features of the L1 series include:

·     High-performance ARM Cortex-M3 32-bit core: up to 33 DMIPS operating at 32MHz

·     Pin-to-pin and software compatibility with all previous STM32 L1 devices

·     Run-mode dynamic power consumption 257µA/MHz at 32MHz down to 177µA/MHz @ 4MHz

·     Two ultra-low-power modes: down to 435nA with SRAM retention;

·     True embedded EEPROM

·     Dual-bank flash allowing fast and fail-safe firmware updates and rollback, thanks to the RWW (Read-While-Write) capabilities.

The new devices benefit from the STM32 L1 DNA including voltage scaling, flexible clock tree with low-power multi-speed internal (MSI) oscillator, and an operating temperature range of -40 to +85°C or up to 105°C in low-power modes, while ST's new 110nm process technology offers the industry's smallest variation in power consumption between 25 °C and +105 °C.

Accelerating software and hardware development, the STM32 L1 512KB is supported by an STM32 Nucleo extension board. These new prototyping boards are mbed1-enabled and support Arduino2 connectivity while also providing ST Morpho3 extension headers that allow access to all of the microcontroller's on-chip peripherals. As part of the STM32 portfolio, all the new devices take full advantage of all the software libraries and development tools already offered for previous ultra-low-power devices, facilitating easy migration for existing applications.

The STM32L151, STM32L152, and STM32L162 lines are now available in volumes priced from US$3.95 (for 512KB devices) in 10,000 unit quantities.

Sign up for our eNewsletters
Get the latest news and updates

Voice Your Opinion!

To join the conversation, and become an exclusive member of Electronic Design, create an account today!