Power Integrations introduced HiperLCS, a family of high-voltage LLC power supply ICs that incorporate the controller, high- and low-side drivers, and both MOSFETs into a single low-cost package. Highly integrated HiperLCS ICs offer the flexibility to optimize designs either for high efficiency - with a maximum efficiency of better than 97% - or for size, by leveraging high-frequency operation (up to 1 MHz) to minimize transformer size and output capacitor footprint.
LLC converters have long been favored over other high-power topologies for applications such as PCs and server power supplies, TVs, and LED streetlights due to their high efficiency and ability to produce compact power supplies; however, designing with them is notoriously difficult. HiperLCS devices address this challenge by providing all of the required functions in a single IC - eliminating up to 30 discrete and passive components in the process - thereby streamlining the design cycle, saving board space, reducing assembly costs, and increasing reliability.
The high switching frequency of HiperLCS devices allows designers to use low-cost SMD ceramic capacitors in the output loop instead of bulky, unreliable electrolytic capacitors, and reduces the size of the magnetics required. It also delivers excellent transformer utilization, with a peak switching frequency of 1 MHz. Power Integrations' new thermally-efficient, low-profile eSIP -16C package further contributes to space savings and reduces heat sink size.
HiperLCS devices have two modes of use. For high-efficiency design, its resonant control circuitry provides very low power loss, allowing designs with efficiency greater than 97% at nominal 66 kHz switching frequency. If cost and size are the determining design criteria, then high switching frequency is preferred. In this latter case, efficiency still remains high - for example, 96% at 250 kHz, the frequency where maximum power is achieved.
HiperLCS devices allow users to improve their designs by setting key circuit parameters, such as dead time and soft start, to provide optimum solutions. The design process is assisted by PI Xls , a real-time design and modeling tool that greatly simplifies the job of the power supply designer.
HiperLCS devices are available now in the new low-profile eSIP-16C package starting at $2.28 each for 10,000-piece quantities (LCS700).
Power Integrations
Part Number: HiperLCS
