ON Semiconductor has released the NCV898031, an adjustable output non-synchronous single-ended primary-inductor converter (SEPIC)/boost controller, targeted for use in automotive applications. With a fixed switching frequency of 2 MHz, the NCV898031 almost doubles the frequency performance offered by most competing devices on the market.
Covering a wide input voltage range of 3.2 V to 40 V, the controller uses peak current mode control with internal slope compensation. It has a built-in regulator that supplies charge to the gate driver, plus a 1.2 V ±2% reference voltage. Protection features include internally-set soft-start, under-voltage lockout, cycle-by-cycle current limiting and thermal shutdown. The AEC-qualified NCV898031 can cope with a 45 V load dump and has an operational temperature range of -40 °C to +150 °C. In addition, its low sleep-mode current of typically 10 µA)helps to keep the total ignition off quiescent current budget to a minimum.
The higher frequency operation of this device allows it to be used with smaller and lower cost inductors and output capacitors, thereby lowering the overall cost and taking up less PCB real estate. Thanks to its protection mechanisms and wide voltage range, it is highly optimized for use in automotive applications, such as instrumentation clusters and infotainment systems.
The NCV898031 is supplied in a RoHS-compliant SOIC-8 package and is priced at $1.02 USD for 2500 unit quantities.
