PXIe AWGs offer 1.4-GB/s data transfer speeds

Oct. 20, 2016

Hackensack, NJ. Spectrum Instrumentation Corp.’s M4x series of PXIe arbitrary waveform generators (AWGs) offer a cost-effective solution for automated testing applications that require fast and accurate electronic signal generation. Based on the modular PXIe instrumentation standard, the M4x Series includes five new modules that provide one, two, or four channels.

Each channel is equipped with the latest 16-bit DAC technology, and the various models have maximum clocking rates of 625 MS/s or 1.25 GS/s. The combination of high resolution and fast clocking rates makes them suitable for generating precise and flexible wave shapes with frequency content from DC to 400 MHz.

The dual-width 3U AWGs feature a PXIe x4 Gen 2 interface that allows waveform data to be transferred to the module’s 4 GB of on-board memory, at speeds up to 1.4 GB/s. Fully PXIe compliant, the modules can be used in any PXIe or PXI hybrid chassis. Support is also provided for chassis distribution features such as the PXIe/PXI reference clock, star-trigger, and trigger bus.

To allow the generation of long and complex waveforms, the AWGs include a number of operating modes such as Single-Shot, Loop, FIFO, Gating, and Sequence Replay. In FIFO mode, the instruments can stream data continuously from PC memory to the AWG memory over the PXIe interface. The AWGs can even output signals while new waveform data is being sent to the on-board memory.

For further versatility, each channel of the AWG is clocked using a precision PLL control system that can be generated internally or from an external clock or reference. Three front-panel, multipurpose I/O connectors allow access to synchronous marker outputs, asynchronous digital I/O lines, the trigger output, the run and arm status and the PLL reference clock.

The AWGs are designed to output signals that emulate those found in the real world, delivering programmable output levels from ±200 mV to ±4 V (±5 V for 625-MS/s models) into high-impedance and ±100 mV up to ±2 V (±2.5 V for 625-MS/s models) for 50 Ω termination. Using 16-bit digital to analog conversion, the AWGs also allow fine signal details to be generated. They deliver signal-to-noise (SNR) up to 72 dB, spurious free dynamic range (SFDR) up to 98 dB, and noise spectral density (NSD) at -150 dBm/Hz.

To allow easy integration into any test system, the units are shipped with a host of software tools so users can create their own control programs with almost any popular programming language. This includes C++, Visual Basic, VB.NET, C#, VisualJ#, Delphi, Java, and Python. Third party software support is also provided for LabVIEW, LabWindows, and MATLAB for users not wanting to write software

Spectrum also offers its SBench6-Pro software that lets users control all of the AWG’s operating modes and hardware settings from a simple, easy-to-use, graphical user interface. The software has a host of built-in features for waveform creation, data analysis, and documentation. These include the EasyGenerator function for producing standard wave shapes such as sine, rectangular, triangle, saw-tooth, SINC and DC. Waveforms can also be created from equations or imported from other devices (such as digitizers and oscilloscopes) or other software programs. SBench6 allows data import and export in the most popular formats such as ASCII, binary and WAV.

The M4x series products are available with immediate delivery. All units are shipped factory tested and include a base version of Spectrum’s SBench 6 software, support drivers for most popular programming languages, and a two-year manufacturer’s warranty. Technical support, including software and firmware updates, is available free.


Sponsored Recommendations

What are the Important Considerations when Assessing Cobot Safety?

April 16, 2024
A review of the requirements of ISO/TS 15066 and how they fit in with ISO 10218-1 and 10218-2 a consideration the complexities of collaboration.

Wire & Cable Cutting Digi-Spool® Service

April 16, 2024
Explore DigiKey’s Digi-Spool® professional cutting service for efficient and precise wire and cable management. Custom-cut to your exact specifications for a variety of cable ...

DigiKey Factory Tomorrow Season 3: Sustainable Manufacturing

April 16, 2024
Industry 4.0 is helping manufacturers develop and integrate technologies such as AI, edge computing and connectivity for the factories of tomorrow. Learn more at DigiKey today...

Connectivity – The Backbone of Sustainable Automation

April 16, 2024
Advanced interfaces for signals, data, and electrical power are essential. They help save resources and costs when networking production equipment.


To join the conversation, and become an exclusive member of Electronic Design, create an account today!