Serial Data-Analysis Option Tuns Data Into 8B/10B Code

June 21, 2004
A novel serial-data-analyzer (SDA) package developed by Agilent Technologies for its Infiniium 54850 series oscilloscopes translates data into two-digit 8B/10B coding. The coding is used for high-speed serial data transmissions over buses like PCI...

A novel serial-data-analyzer (SDA) package developed by Agilent Technologies for its Infiniium 54850 series oscilloscopes translates data into two-digit 8B/10B coding. The coding is used for high-speed serial data transmissions over buses like PCI Express, Serial ATA, and Fibre Channel.

The E2688A SDA provides advanced analysis techniques for 8B/10B coding that help engineers save days of time in debugging, characterizing, and validating high-speed serial bus designs. The SDA includes software clock recovery and real-time eye mask testing features that help streamline the cycle of acquiring, testing, and identifying failures.

An optional N5393A PCI Express precompliance test package is also available for the SDA. It lets designers perform rigorous tests on their products to determine compliance with PCI Express standards.

"Agilent has been tracking the high-speed serial-bus trend that is fundamentally changing the nature of today's fastest Electronic Designs," says Ron Nersesian, vice president and general manager of Agilent's Design Validation Division. "Waveform analysis is becoming more complex, particularly with the increased use of high-speed standards like Fibre Channel."

Both the E2688A SDA and the optional N5393A PCI Express precompliance test package are available now at respective prices of $7995 and $1995.

Agilent Technologieswww.agilent.com (800) 429-4444, ext. 7891

See associated figure

About the Author

Roger Allan

Roger Allan is an electronics journalism veteran, and served as Electronic Design's Executive Editor for 15 of those years. He has covered just about every technology beat from semiconductors, components, packaging and power devices, to communications, test and measurement, automotive electronics, robotics, medical electronics, military electronics, robotics, and industrial electronics. His specialties include MEMS and nanoelectronics technologies. He is a contributor to the McGraw Hill Annual Encyclopedia of Science and Technology. He is also a Life Senior Member of the IEEE and holds a BSEE from New York University's School of Engineering and Science. Roger has worked for major electronics magazines besides Electronic Design, including the IEEE Spectrum, Electronics, EDN, Electronic Products, and the British New Scientist. He also has working experience in the electronics industry as a design engineer in filters, power supplies and control systems.

After his retirement from Electronic Design Magazine, He has been extensively contributing articles for Penton’s Electronic Design, Power Electronics Technology, Energy Efficiency and Technology (EE&T) and Microwaves RF Magazine, covering all of the aforementioned electronics segments as well as energy efficiency, harvesting and related technologies. He has also contributed articles to other electronics technology magazines worldwide.

He is a “jack of all trades and a master in leading-edge technologies” like MEMS, nanolectronics, autonomous vehicles, artificial intelligence, military electronics, biometrics, implantable medical devices, and energy harvesting and related technologies.

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!