ILPS-45 Series LVIT linear position sensors

March 31, 2020
BLOOMFIELD HILLS, MIHarold G. Schaevitz Industries LLC(HGSI) has released its ILPS-45 series of inductive, contactless linear position sensors using LVIT Technology. The ILPS-45 linear position sensors are specifically designed for measuring applications requiring rugged devices, whether measuring position of steam turbine valves, mounted in a paper mill head box or calendar roll stand, or outdoors fastened to a building, bridge or structure. The ILPS-45 series was designed after identifying the wants and needs of engineers in the industrial world, so ILPS-45 Series linear position sensors can withstand the high vibration and severe shock environment found in steel, aluminum, and paper mills, as well as extremes of temperature and humidity found in most outdoor applications where many other types of linear position sensors cannot survive.

 The ILPS-45 linear position sensor series uses a proprietary inductive technology that allows it to replace traditional DC-LVDTs in most applications. Its simple coil design permits the sensor to be both shorter and more rugged than its DC-LVDT counterpart while operating over a wider temperature range.  The ILPS-45 series is available with optional mounting flanges, rod eye ends, connector or cable terminations, and a captive connecting rod assembly that cannot break loose. The SenSet™ range adjustability feature allows the user to scale the sensor's zero and full span output to the actual range of motion of the workpiece being measured after the sensor is installed.

ILPS-45 Features:

•           Operating temp range -40C to 85C

•           Ranges from 4 to 18 inches (100 - 450mm)

•           Double shaft seals to keep dirt and grime out of the bore

•           Axial or radial connector or cable terminations

•           SenSet™ range adjustability

•           1.75 inch (44.5mm) outer diameter body with 5 mm wall thickness

For more info on this product: https://www.hgsind.com/product/ilps-45-linear-lvit-position-sensor-rod-end-joints

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!