Dimmable 10 Watt, AC-DC LED Drivers

Aug. 19, 2011
Bias Power's new 10 watt BPWXLD10 LED drivers offer 350mA constant current operation with 1% regulation over the entire input voltage range of 100-308VAC, 50/60Hz.

Bias Power's new 10 watt BPWXLD10 LED drivers offer 350mA constant current operation with 1% regulation over the entire input voltage range of 100-308VAC, 50/60Hz. LED string voltages up to 30VDC at 350mA or 14VDC at 700mA are supported. The drivers are dimmable and adjust output current based on either 0-10 VDC reference or ELV/Triac tracking. A constant-voltage version handles LED string voltages up to 12VDC. Either is compatible with digital control circuitry.

Unlike conventional LED drivers, the BPWXLD10 has unique cold-starting circuitry, tested to -55°C; proven to kick-start LEDs in extreme cold. The modules meet NEMA 6P / IP67 moisture and submersion and easily satisfy the strict requirements for outdoor architectural, building and low-bay garage LED lighting. Rated for 3,000VAC isolation, they feature inherent over-current; short circuit (shorted string), overload and open circuit (string break) protection. These capabilities combine to make a superb solution for high-reliability indoor and outdoor LED lighting fixtures.

All modules are specified for full-rated power over the temperature range of -40 to +85°C. The nominal 82% efficiency results in some of the highest lumens/watt, end-to-end efficacy ratings for LED solutions in the market today. Performance is based on Bias' patented* circuit design, incorporating its own custom ASIC controller.

The ultra-compact square design gives lighting designers options not possible with longer, rectangular packages. The BPWXLD10 measures 2.1 x 2.3 inches, with a height of 1.25 inch. Standard connections are by 11- inch, 18AWG color-coded "flying leads," with dual-mounting slots to simplify installation.

Bias Power LED Driver modules comply with UL/CSA and EN Product Safety Requirements (UL8750 Class 2) and meet conducted EMI emissions EN 55022, Class B and FCC Part 15, Class B. The modules have an MTBF rating of >500K operating hours.

BPOXLD10 Series AC-DC LED driver modules are available for immediate sampling, with 8-12 week delivery for production.

Bias Power, Inc.
Part Number: BPWXLD10

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!