Stereo Audio CODEC Sports USB Controller and S/PDIF I/O Terminal

May 1, 2002
Claimed as industryÕs first stereo audio CODEC family with a built-in USB controller and an internal S/PDIF-compatible I/O terminal, the PCM290x series is targeted at mini-stereo decks, portable CD/cassette radios, headphone/ microphone combo

Claimed as industryÕs first stereo audio CODEC family with a built-in USB controller and an internal S/PDIF-compatible I/O terminal, the PCM290x series is targeted at mini-stereo decks, portable CD/cassette radios, headphone/ microphone combo units and domestic-use robots. The PCM290x family includes four products with two different power supply formats: the USB bus-powered PCM2900 and PCM2902 with an operating voltage of 2.7V to 3.6V, and the self-powered PCM2901 and PCM2903 with an operating voltage of 5V. With a 16-bit resolution and maximum sample rate of 48 kHz, the family has a dynamic range of 89 dB (typical) for a/d converters and 93 dB (typical) for d/a converters with 0.005% THD+N (typical) in self-powered products. In addition, the series contains built-in protection against unauthorized copying (SCMS), is full duplex compatible with a 12-MHz on-chip clock generator, and features HID (human interface device), volume and mute control. The series also contains a suspend flag feature that saves power in target applications. Each chip in the series is controlled by the USB drivers included in the OS software, eliminating the need for specialized drivers and making product development more efficient, the company says. Packaged in a 28-pin SSOP, pricing for the PCM 2900/01 is 3.95 each/1,000 and for the PCM2902/03 is $4.25. TEXAS INSTRUMENTS INC., Dallas, TX. (800) 477-8924.

Company: TEXAS INSTRUMENTS INC.

Product URL: Click here for more information

Sponsored Recommendations

Near- and Far-Field Measurements

April 16, 2024
In this comprehensive application note, we delve into the methods of measuring the transmission (or reception) pattern, a key determinant of antenna gain, using a vector network...

DigiKey Factory Tomorrow Season 3: Sustainable Manufacturing

April 16, 2024
Industry 4.0 is helping manufacturers develop and integrate technologies such as AI, edge computing and connectivity for the factories of tomorrow. Learn more at DigiKey today...

Connectivity – The Backbone of Sustainable Automation

April 16, 2024
Advanced interfaces for signals, data, and electrical power are essential. They help save resources and costs when networking production equipment.

Empowered by Cutting-Edge Automation Technology: The Sustainable Journey

April 16, 2024
Advanced automation is key to efficient production and is a powerful tool for optimizing infrastructure and processes in terms of sustainability.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!