Spectrum and Backhaul Inhibit Wireless Growth

Dec. 13, 2011
The two main factors slowing cellular expansion and innovation are spectrum shortages and lagging backhaul updating.

The DragonWave Avenue Link is a microwave backhaul radio for use with micro and picocells. The entire radio including the 5-in. integrated antenna is included. Connection to the system is by an RJ-45 Ethernet port that also delivers –48-V dc power. It operates on the standard microwave bands of 24, 26, 28, 31, 38, and 60 GHz.

Two major critical issues are affecting the growth of wireless: spectrum and backhaul network capacity.

With only a finite amount of spectrum available, cellular operators are constantly fretting over their holdings, wondering if there will ever be enough to completely implement their Long-Term Evolution (LTE) and 4G systems to come. With spectrum so expensive, every megahertz becomes a prize to cherish.

Will there be enough to implement the National Broadband Plan put forth by the government last year? The Federal Communications Commission (FCC) is working to find more spectrum and may even begin taking assigned spectrum from the TV stations for auctioning and repurposing. While spectrally efficient modulation and access methods are helping, the only real thing stopping wireless growth will be a lack of spectrum.

Meanwhile, three basic types of backhaul connect basestations back to the carrier’s switching centers: copper, fiber, and microwave. In the U.S., most backhaul has been achieved by TDM-based (time domain multiplexing) T1 lines. But as data traffic has grown, this backhaul has become inadequate.

Adding more T1 lines at great expense has not been the best solution. Fiber has replaced copper in some instances, but the cost of running fiber is high. Microwave is a growing option. Licensed bands in the 11-, 18-, and 23-GHz range are available at moderate cost and can provide data rates as high as 4 to 5 Gbits/s. A modern 3G cell site needs a capacity of up to 100 Mbits/s, but a 4G/LTE site needs 100- to 300-Mbit/s capacity to be useful.

The new microwave systems based on Ethernet with Carrier Ethernet or multiprotocol label switching (MPLS) are now available to carry the increasing Internet protocol (IP) load. Most are hybrid systems that also support the legacy TDM systems as well (see the figure).

About the Author

Lou Frenzel | Technical Contributing Editor

Lou Frenzel is a Contributing Technology Editor for Electronic Design Magazine where he writes articles and the blog Communique and other online material on the wireless, networking, and communications sectors.  Lou interviews executives and engineers, attends conferences, and researches multiple areas. Lou has been writing in some capacity for ED since 2000.  

Lou has 25+ years experience in the electronics industry as an engineer and manager. He has held VP level positions with Heathkit, McGraw Hill, and has 9 years of college teaching experience. Lou holds a bachelor’s degree from the University of Houston and a master’s degree from the University of Maryland.  He is author of 28 books on computer and electronic subjects and lives in Bulverde, TX with his wife Joan. His website is www.loufrenzel.com

Sponsored Recommendations


To join the conversation, and become an exclusive member of Electronic Design, create an account today!