Components: VCXOs Boost Frequency Range Between 120 MHz And 600 MHz

April 26, 2004
The VCP series of voltage-controlled crystal oscillators (VCXOs) boasts a frequency range that extends from 120 to 600 MHz. The VCXOs come in standard 7.5- by 5.0- by 1.5-mm ceramic packages. Features include low jitter of −120 dBc/Hz maximum...

The VCP series of voltage-controlled crystal oscillators (VCXOs) boasts a frequency range that extends from 120 to 600 MHz. The VCXOs come in standard 7.5- by 5.0- by 1.5-mm ceramic packages. Features include low jitter of −120 dBc/Hz maximum and phase noise of 1 ps maximum for the VCP32AXT and VCP35AXT with a phase-locked loop (PLL). Operating temperature ranges from −10 °C to 70 °C, supply voltage is 3.3 V ±5%, and maximum input current is 120 mA. Pullability ranges are ±30, ±55, and ±125 ppm at 1.65 V ±1.5 V. Output symmetry is 40% to 60% at a 50% V p-p level. Price for the VCP35AXT 311.020-MHz is $16.97 each in 1000-unit quantities, with delivery in six to eight weeks.

Fox Electronics www.foxonline.com (888) GET-2-FOX

About the Author

Roger Allan

Roger Allan is an electronics journalism veteran, and served as Electronic Design's Executive Editor for 15 of those years. He has covered just about every technology beat from semiconductors, components, packaging and power devices, to communications, test and measurement, automotive electronics, robotics, medical electronics, military electronics, robotics, and industrial electronics. His specialties include MEMS and nanoelectronics technologies. He is a contributor to the McGraw Hill Annual Encyclopedia of Science and Technology. He is also a Life Senior Member of the IEEE and holds a BSEE from New York University's School of Engineering and Science. Roger has worked for major electronics magazines besides Electronic Design, including the IEEE Spectrum, Electronics, EDN, Electronic Products, and the British New Scientist. He also has working experience in the electronics industry as a design engineer in filters, power supplies and control systems.

After his retirement from Electronic Design Magazine, He has been extensively contributing articles for Penton’s Electronic Design, Power Electronics Technology, Energy Efficiency and Technology (EE&T) and Microwaves RF Magazine, covering all of the aforementioned electronics segments as well as energy efficiency, harvesting and related technologies. He has also contributed articles to other electronics technology magazines worldwide.

He is a “jack of all trades and a master in leading-edge technologies” like MEMS, nanolectronics, autonomous vehicles, artificial intelligence, military electronics, biometrics, implantable medical devices, and energy harvesting and related technologies.

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!