Pressure-Sensing Pad Takes Real-Time Measurements

July 7, 2003
The Tactilus electronic tactile force and pressure sensing pad lets engineers monitor precisely (within ±10%), in real time, how force is dispersed between two contacting or mating surfaces...

The Tactilus electronic tactile force and pressure sensing pad lets engineers monitor precisely (within ±10%), in real time, how force is dispersed between two contacting or mating surfaces while the event occurs. Pressures measured range from 0.1 to 12,000 PSI at a query rate of up to 60,000 sensor points/s. Pad sizes range from 1 by 1 in. to 32 by 80 in. with 19-mil sensor thickness. Each pressure-mapping system comes with a mapping pad, power supply, software, and interface cables, as well as a data-collection controller. Pricing starts at $15,000.

Sensor Products Inc.www.sensorprod.com; (973) 560-4826

About the Author

Roger Allan

Roger Allan is an electronics journalism veteran, and served as Electronic Design's Executive Editor for 15 of those years. He has covered just about every technology beat from semiconductors, components, packaging and power devices, to communications, test and measurement, automotive electronics, robotics, medical electronics, military electronics, robotics, and industrial electronics. His specialties include MEMS and nanoelectronics technologies. He is a contributor to the McGraw Hill Annual Encyclopedia of Science and Technology. He is also a Life Senior Member of the IEEE and holds a BSEE from New York University's School of Engineering and Science. Roger has worked for major electronics magazines besides Electronic Design, including the IEEE Spectrum, Electronics, EDN, Electronic Products, and the British New Scientist. He also has working experience in the electronics industry as a design engineer in filters, power supplies and control systems.

After his retirement from Electronic Design Magazine, He has been extensively contributing articles for Penton’s Electronic Design, Power Electronics Technology, Energy Efficiency and Technology (EE&T) and Microwaves RF Magazine, covering all of the aforementioned electronics segments as well as energy efficiency, harvesting and related technologies. He has also contributed articles to other electronics technology magazines worldwide.

He is a “jack of all trades and a master in leading-edge technologies” like MEMS, nanolectronics, autonomous vehicles, artificial intelligence, military electronics, biometrics, implantable medical devices, and energy harvesting and related technologies.

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!