Wire/Tube Cutter Is Stepper Motor Driven And Programmable

The Model WC300 Automatic Wire & Tubing Cutter is a compact, stepper motor driven cutter that can process wire and small cables from 10 to 30 AWG and sleeving or tubing up to 5/16 in. into any lengths. Set up is less than 1 minute on an easy-to-read keypad without tools. It can process up to 12,000 1-in. pieces per hour, or 6900 10-in. pieces per hour. There are 10 programmable batches and three variable feed rates. An out-of-material sensor pauses the run if the material is exhausted.