Plastic Caps Sub For Ceramic Types

Oct. 1, 1999
Designed for high-repetition-rate, pulse-discharge applications up to 50 kV, the PD Series of high-voltage pulse discharge capacitors are extended foil, plastic-cased capacitors for use in applications such as modulators for accelerators and OEM

Designed for high-repetition-rate, pulse-discharge applications up to 50 kV, the PD Series of high-voltage pulse discharge capacitors are extended foil, plastic-cased capacitors for use in applications such as modulators for accelerators and OEM lasers. This series is designed for maximum discharge up to 50 kA and RMS current of 25A, 35A, 40A, 45A and 60A. Inductance is less than 20 nH, which makes the units suitable replacements for ceramic capacitors where multiple parallel units are often needed to achieve similar inductance levels. Operating temperature is -30º to 65ºC.

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

TTI Rail Transit Line Card

April 8, 2024
TTI stocks premier interconnect, passive and electromechanical components for rail systems as diverse as door control, HVAC and cabin entertainment, trackside safety, communications...

Littelfuse: Take Charge for Peak Performance in Material Handling Evs

April 8, 2024
As material handling electric vehicles such as automated guided vehicles (AGVs), autonomous mobile robots (AMRs) and forklifts become an integral part of Industry 4.0, Littelfuse...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!