MCU Brings Low-Cost Option With 32 Kbytes Of Memory

July 21, 2003
Housed in 64- and 80-pin TQFPs, the PIC18FXX20 flash microcontrollers (MCUs) cram in 32 kbytes of flash memory, 2 kbytes of RAM, and 1 kbyte of EEPROM. Peripherals include an analog-to-digital converter (ADC) with up to 16 channels by 10-bit...

Housed in 64- and 80-pin TQFPs, the PIC18FXX20 flash microcontrollers (MCUs) cram in 32 kbytes of flash memory, 2 kbytes of RAM, and 1 kbyte of EEPROM. Peripherals include an analog-to-digital converter (ADC) with up to 16 channels by 10-bit resolution, five capture/compare/pulse-width-modulation modules, up to 10-MIPS performance at 10 MHz, two 8-bit timers, three 16-bit timers and a watchdog timer (WDT), dual analog comparators, a parallel port, and two addressable USART modules with serial peripheral interface and I2C support. Additional features include a programmable 16-level low-voltage detection module (PLVD), 32-kHz secondary oscillator clock input, and a 4× phase-locked loop (PLL) for high-frequency oscillators. The MPLAB ICD 2 development kit is available for $188.

Microchip Technology Inc.www.microchip.com
About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form. 

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below. 

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.  

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence. 

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!