Embedded Systems Design Using The Rabbit 3000 Microprocessor

June 23, 2005

By Kamal Hyder and Bob Perrin

The Rabbit 3000 is Rabbit Semiconductor’s latest microcontroller line and it is covered very well in the book Embedded System Design using the Rabbit 3000 Microprocessor. It provides a look at the architecture of the chip, as well as how the chip can be used for controlling an embedded system.

The book starts at ground zero, approaching embedded programming techniques from a general standpoint before delving into Rabbit 3000-specific support. It also addresses important programming topics, like debugging, dedicating a full chapter to it. It has some obvious, but useful, quotes like:

“Never assume anything. Never assume the tools are working flawlessly. Never assume that the hardware is good. Never assume that the code is without bugs.” Good recommendations for any developer.

The book covers assembler and the examples are a mix of C and assembler embedded in C. The overall theme is digital with only a few mentions of analog interfacing. Networking is well covered with a substantial web application sample.

This book is a “must have” for any developers utilizing the Rabbit 3000 processor.

If you're interested in embedded systems development, you might also like these books:

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.