16-bit Micro Delivers Advanced Analog Front End

April 21, 2011

Texas Instruments' latest MSP430 delivers an advanced analog front end that target low power metrology applications.

1 of Enlarge image

MSP430AFE2xx architecture

Be it smart meters or smoke detectors, accurate sensing is key to successful products. Texas Instruments's (TI) low power, 16-bit MSP430 microcontrollers have been utilized for these applications for quite awhile. The latest incarnation, the MSP430AFE2xx (Fig. 1), targets metrology applications like those mentioned using a new analog front end (AFE). It challenges many ROM-based solutions with a low power flash-based platform.

The 16-bit micro includes from 4 to 8 Kbytes of flash and up to 256 bytes of RAM. It has a 6-bit multiplier, 16-bit timers and a USART that can handle an SPI interface. The AFE include one to three 24-bit Sigma-Delta ADCs. These may be used in single phase metering applications in which case the extra channels could be used for anti-tampering or temperature sensing. The ADCs have a 0.1% accuracy with a dynamic range of 2400:1.

The chips are available in 24-pin TSOP packages. This supports up to 11 GPIOs.

The software development tools include the MSP430 Code Composer IDE and TI's Energy Library. There are a number of demo and eval platforms available as well. The MSP430AFE EVM is a single phase eletric meter device that includes support for RF and infrared communication. The metrology software that comes with the application note includes calibration using and external GUI. The Energy Watchdog demo module has an LCD display with a pass through plug. It monitors the power passing through the device using a pair of MSP430 chips. The other provides LCD and USB support.

Texas Instruments

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.