Packet Processors Enhance Voice Quality Over IP Networks

Dec. 1, 2002
Promising to boost voice quality over IP networks, the MT90880/1/2/3 packet processors are touted as the industry's first devices to achieve high-density circuit emulation services over packet (CESoP) for TDM. The devices are also said to be the first

Promising to boost voice quality over IP networks, the MT90880/1/2/3 packet processors are touted as the industry's first devices to achieve high-density circuit emulation services over packet (CESoP) for TDM. The devices are also said to be the first purpose-built packet processors to support scaleable, low-cost Ethernet backplanes. The MT90881 and MT90883 target CESoP applications in next-generation access equipment. The MT90881 converts up to 32 T1/E1 streams or 1,024 TDM channels in N x 64 Kb/s configurations to Ethernet and IP packets. The MT90883 converts eight T1/E1 streams or 256 channels. The MT90880 and MT90882 are designed for TDM backplane replacement and feature on-board, non-locking TDM switches. The switches route incoming traffic either directly to packetization circuitry or through a local TDM interface. The MT90880 employs a 1,024 x 1,024-channel switch that supports 32 streams of N x 64 Kb/s TDM traffic. The MT90882 has a 256 x 256-channel switch that supports eight streams of N x 64 Kb/s. The TDM interfaces on all four chips accept traffic at rates of 2.048 Mb/s or 8.192 Mb/s. The packet switch interfaces are dual redundant media independent interfaces operating at 100 Mb/s. The chips are also pin-to-pin compatible, allowing the same architecture to be used for both low- and high-density access equipment. The MT90880, MT90881, MT90882 and MT90883 are priced at $209, $165, $156 and $135, respectively, each/1,000. ZARLINK SEMICONDUCTOR, Ottawa, Canada. (613) 270-7115.

Company: ZARLINK SEMICONDUCTOR

Product URL: Click here for more information

Sponsored Recommendations

The Importance of PCB Design in Consumer Products

April 25, 2024
Explore the importance of PCB design and how Fusion 360 can help your team react to evolving consumer demands.

PCB Design Mastery for Assembly & Fabrication

April 25, 2024
This guide explores PCB circuit board design, focusing on both Design For Assembly (DFA) and Design For Fabrication (DFab) perspectives.

What is Design Rule Checking in PCBs?

April 25, 2024
Explore the importance of Design Rule Checking (DRC) in manufacturing and how Autodesk Fusion 360 enhances the process.

Unlocking the Power of IoT Integration for Elevated PCB Designs

April 25, 2024
What does it take to add IoT into your product? What advantages does IoT have in PCB related projects? Read to find answers to your IoT design questions.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!