Speed Shifting

April 27, 2007
Minimizing the number of cases in a standard is important in dealing with hardware designed for the mass market. USB, 1394B, Fibre Channel, SATA, and SAS fit into this category. Yet common connectors can still allow for some variation when it comes to spe

Minimizing the number of cases in a standard is important in dealing with hardware designed for the mass market. USB, 1394B, Fibre Channel, SATA, and SAS fit into this category. Yet common connectors can still allow for some variation when it comes to speed, and each of these connectors has multiple incarnations.

From a board interconnect view, these serial interfaces provide a valuable mechanism to link peripherals to host controllers. In fact, 1394B is more likely to be in consumer or automotive applications than in server backplanes.

USB tends to span the consumer, commercial, and industrial spaces like PCI Express. While it’s typically found on motherboards for peripheral connections, it can be used for board interconnects as with the new StackableUSB standard (see “USB Stacks Up With A Modular Industrial Form Factor”).

The other three interfaces—Fibre Channel, SATA, and SAS—sit in the storage arena. They’re quite common as board interconnects, though they’re typically limited to host motherboard to storage controller boards.

Fibre Channel is entrenched in enterprise storage and rarely shows itself in other spaces, with some exceptions. It’s often found in embedded data recording applications. And actually, it’s more of an intermediate interface since disk back ends are typically SATA or SAS drives these days, though native Fibre Channel hard drives are available.

SAS, Fibre Channel, and Ethernet come in fixed flavors. But high bandwidth can be obtained without stepping up to a faster version of the protocols by bonding channels together. This tends to happen at a slightly higher level than the approach used with PCI Express and its ilk, but the results are the same—more throughput using more cable connections.

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form. 

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below. 

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.  

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence. 

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!