Powerelectronics 4207 076070 Semtech

µClamp 3381P Protects Against Transients

Nov. 2, 2016
Semtech Corporation announced the µClamp 3381P, a single-line, 3.3V surge rated transient voltage suppression device for safeguarding industrial and consumer interfaces against transient voltage threats.

Semtech Corporation announced the µClamp® 3381P, a single-line, 3.3V surge rated transient voltage suppression (TVS) device for safeguarding industrial and consumer interfaces against transient voltage threats.

The µClamp3381P achieves an unmatched surge/silicon area ratio offering 25A (8x20µs) surge immunity in an ultra-small 1.0 x 0.6 mm package. This surge handling performance is critical for safeguarding industrial data links to reliably transport data in harsh environments, including Internet of Things (IoT) end nodes, LCD televisions and display banners, tablets, surveillance cameras and optical modules.

Built on Semtech's industry-leading process technology, the µClamp3381P outperforms current industry solutions with nearly ideal ESD clamping characteristics. The dynamic resistance of the µClamp3381P is only 0.025 W, making the I-V curve characteristics of the device close to that of an ideal diode.

  • Transient protection for high-speed data lines to: IEC 61000-4-2 (ESD) ±30kV (air), ±30kV (contact); IEC 61000-4-4 (EFT) 40A (5/50ns); IEC 61000-4-5 (Lightning) 25A (8/20µs)
  • 3.3V working voltage protection
  • High surge capability: 25A (tp=8/20µs)
  • Protects 1 I/O line
  • Low capacitance (<35 pF line-to-line)
  • Small 1.0 x 0.6 x 0.5mm package
  • Pb Free and RoHS/WEEE compliant
  • The µClamp3381P is available in production quantities and is priced at $0.26 each in 10,000-piece lots. 

    Sponsored Recommendations

    TTI Transportation Resource Center

    April 8, 2024
    From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

    Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

    April 8, 2024
    Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

    TTI Hybrid & Electric Vehicles Line Card

    April 8, 2024
    Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

    Bourns: Automotive-Grade Components for the Rough Road Ahead

    April 8, 2024
    The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

    Comments

    To join the conversation, and become an exclusive member of Electronic Design, create an account today!