ADLINK launches GigE Vision PoE+ frame grabber

Oct. 19, 2016

San Jose, CA. ADLINK Technology, a global provider of embedded building blocks and application-ready intelligent platforms, has announced the release of its new PCIe-GIE72/74 2/4CH PCI Express GigE vision Power over Ethernet (PoE)+ frame grabbers, which provide support for a range of machine-vision applications. Key assets, such as cameras and other equipment, are secured from damage by the PCIe-GIE72/74’s PoE power protection. In addition, a user-friendly PoE management utility and APIs monitor and control PoE ports in real time and enable prediction of possible failure events.

Any number of PCIe-GIE72/74 cards can be installed in a single system without occupying any BIOS I/O resources. Combined with operating temperature tolerance from 0˚C to 70˚C, the multicard capability makes the PCIe-GIE72/74 suitable for deployment with fanless computers in environments with limited space and in applications such as automated optical inspection (AOI) and industrial automation.

The PCIe-GIE72/74 was designed with comprehensive PoE protections in order to eliminate the threat of asset damage. The frame grabbers respond to over/under current, voltage, and temperature events, and their automated power budget control manages budgets according to source (PCIe or 4/6-pin Molex connector). When the budget is exceeded, PoE power is interrupted to prevent damage to connected devices.

The PCIe-GIE72/74’s easy-to-use utility and APIs provide real-time PoE status monitoring of device class, voltage, current, wattage, and temperature. PoE power can be remotely switched on and off; PoE port priority and thermal thresholds remotely set; and possible failure predicted, all reducing operating costs and circumventing downtime.

The PCIe-GIE7x Pro series with PoE will be available in early November.

www.adlinktech.com

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!