Celebrating 71 Years of Ideas for Design
What you’ll learn:
- What are Ideas for Design?
- Why have Ideas for Design articles been important to Electronic Design readers?
- What’s new with Ideas for Design?
This episode of Inside Electronics brings together a horde of editors to talk about Electronic Design’s Ideas for Design article series that’s now 71 years old and still kicking. These include:
- Alix Paultre, Inside Electronics host, Editor-at-Large
- William Wong, Senior Content Director, Electronic Design
- Andy Turudic, Senior Editor, Electronic Design
- Cabe Atwell, Senior Editor, Electronic Design
- Roger Engelke, Managing Editor, Electronic Design
- David Maliniak, Editor, Microwaves & RF
The very first IFD was entitled “Human-Engineered Oscilloscope Panel,” authored by Milton Sol Weiss (Fig. 1). The series has continued since then, appearing in almost every issue.
Ideas for Design started with one article per issue, but it grew in popularity with more articles added each subsequent issue (Fig. 2). The short, app-note-style format resulted in articles that were often just a page that include a diagram and text.
IFDs continued to come in even as Electronic Design transitioned to an online-only publication. Engineers can still contribute their Ideas for Design.
SHOW NOTES
00:52 – Ideas for Design: Year 71
01:54 – What is Ideas for Design?
04:11 – Importance of Idea Collaboration
08:43 – Analog & Power Evolution
11:40 – What to Expect from Ideas for Design
13:15 – Editors Travel Back in Time
16:51 – Collecting Ideas for Design
22:04 – Internet's Impact on Idea-Sharing
More Ideas for Design
About the Author
William G. WongWilliam G. Wong
Senior Content Director - Electronic Design and Microwaves & RF
I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.
You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.
Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.
You can visit my social media via these links:
- AltEmbedded on Electronic Design
- Bill Wong on Facebook
- @AltEmbedded on Twitter
- Bill Wong on LinkedIn
I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.
I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.
Alix PaultreAlix Paultre
Editor-at-Large, Electronic Design
An Army veteran, Alix Paultre was a signals intelligence soldier on the East/West German border in the early ‘80s, and eventually wound up helping launch and run a publication on consumer electronics for the US military stationed in Europe. Alix first began in this industry in 1998 at Electronic Products magazine, and since then has worked for a variety of publications in the embedded electronic engineering space. Alix currently lives in Wiesbaden, Germany.
Also check out his YouTube watch-collecting channel, Talking Timepieces.
Andy TurudicAndy Turudic
Technology Editor, Electronic Design
Andy Turudic is a Technology Editor for Electronic Design Magazine, primarily covering Analog and Mixed-Signal circuits and devices and also is Editor of ED's bi-weekly Automotive Electronics newsletter.
He holds a Bachelor's in EE from the University of Windsor (Ontario Canada) and has been involved in electronics, semiconductors, and gearhead stuff, for a bit over a half century. Andy also enjoys teaching his engineerlings at Portland Community College as a part-time professor in their EET program.
"AndyT" brings his multidisciplinary engineering experience from companies that include National Semiconductor (now Texas Instruments), Altera (Intel), Agere, Zarlink, TriQuint,(now Qorvo), SW Bell (managing a research team at Bellcore, Bell Labs and Rockwell Science Center), Bell-Northern Research, and Northern Telecom.
After hours, when he's not working on the latest invention to add to his portfolio of 16 issued US patents, or on his DARPA Challenge drone entry, he's lending advice and experience to the electric vehicle conversion community from his mountain lair in the Pacific Northwet[sic].
AndyT's engineering blog, "Nonlinearities," publishes the 1st and 3rd Tuesday of each month. Andy's OpEd may appear at other times, with fair warning given by the Vu meter pic. His cartoon series, "Inventors", appears each week in Electronic Design Weekly.
Cabe AtwellCabe Atwell
Technology Editor, Electronic Design
Cabe is a Technology Editor for Electronic Design.
Engineer, Machinist, Cartoonist, Maker, Writer. A graduate Electrical Engineer actively plying his expertise in the industry and at his company, Gunhead. When not designing/building, he creates a steady torrent of projects and content in the media world. Many of his projects and articles are online at element14 & SolidSmack, industry-focused work at EETimes & EDN, and offbeat articles at Make Magazine. Currently, you can find him hosting webinars and contributing to Electronic Design and Machine Design.
Cabe is an electrical engineer, design consultant and author with 25 years’ experience. His most recent book is “Essential 555 IC: Design, Configure, and Create Clever Circuits”
Cabe writes the Engineering Life & Engineering on Friday blog on Electronic Design.
See Cabe's cartoons & comic strips here.
Roger Engelke Jr.Roger Engelke Jr.
Managing Editor - Electronic Design and Microwaves & RF
Roger manages the websites and print issues for Electronic Design and Microwaves &RF.
David MaliniakDavid Maliniak
MWRF Executive Editor
Related
L Fblog 70th PromoComment About the Article
To join the conversation, and become an exclusive member of Electronic Design, create an account today!
Leaders LogoLeaders relevant to this article:












