Powerelectronics 1030 Ir 77 0

Automotive MOSFETs suit traditional and hybrid vehicles

July 8, 2011
International Rectifier announces a new family of automotive-qualified MOSFETs for a variety of applications requiring low on-state resistance (RDS(on)), including heavy load applications used in traditional Internal Combustion Engine (ICE) platforms, as well as micro and hybrid vehicles.

International Rectifier announces a new family of automotive-qualified MOSFETs for a variety of applications requiring low on-state resistance (RDS(on)), including heavy load applications used in traditional Internal Combustion Engine (ICE) platforms, as well as micro and hybrid vehicles.

These rugged planar devices feature low RDS(on) and are available across a range of voltages from 40 to 75 V in a variety of Surface Mount Device (SMD) and through-hole packages. The AUIRL1404S is a logic level gate drive MOSFET offered at 40 V; other devices in the family are standard gate drive MOSFETs offered at 40, 55, and 75 V.

The new automotive MOSFETs are subject to dynamic and static part average testing combined with 100% automated wafer level visual inspection. AEC-Q101 qualification requires that there is no more than a 20% change in RDS(on) after 1,000 temperature cycles of testing. In extended testing, IR’s new AU bill of materials demonstrated a maximum RDS(on) shift of less than 10% at 5,000 temperature cycles. The new devices are qualified according to AEC-Q101 standards, and feature an environmentally friendly, lead-free, and RoHS compliant bill of materials.

For more information, contact International Rectifier, 233 Kansas St., El Segundo, CA 90245. Phone: (310) 252-7105.

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!