A Trip With A CoPilot

Sept. 23, 2008
In the search for decent UMPC software, Technology Editor Bill Wong takes a trip with CoPilot.

Finding decent UMPC software for ultra-mobile PCs (UMPCs) or mobile Internet devices (MIDs) is a challenge, even though these devices often run a standard operating system such as Windows XP. The problem arises because of screen size and the target audience for many of the applications. In most cases the target will be a full size laptop or desktop machine with a large screen and mouse. Touchscreens are just now appearing in the mainstream and high resolution displays are the norm.

The screen size of UMPCs is small, although larger than a cell phone, and a touch interface is the norm—although Bluetooth keyboards and mice are handy. Unfortunately, applications written for the desktop do not always translate well to the small screen. Menus require at least a stylus to navigate and reading much of the text requires better than eagle-eye vision. Worse yet, most applications assume at least a 1024 x 768 resolution where multiple window panes is an advantage. This is not so on a smaller screen where real estate is at a premium.

This is why I find applications like Alk Industries’ CoPilot to be such a find because they allow operation without pulling the stylus out of its holder and it can be used without a magnifying glass. Its screen interface (Fig. 1) is clean and on par with GPS navigation interfaces that have done well with small screens and touch interfaces since their inception. Granted, CoPilot is a GPS navigation system, but I have tried Windows-based alternatives with fair (but not optimal) results. On the other hand, CoPilot fits the bill.

The first thing I had to setup after installing the program on Windows XP was the GPS unit. I hate wires and this Bluetooth unit was great. The Samsung Q1B (see A Long Look At Samsung’s Q1B) I use daily has built-in Bluetooth support, but not a built-in GPS unit, so this was quite handy. It can be placed on a dashboard without having connecting cable and it works as well as a wired unit.

One major advantage over most GPS systems is the ability to configure routes using a desktop machine or by remote access of the UMPC. The ability to see lots of information on the screen (Fig. 2) was useful when creating and reviewing route information. This is often tiresome on a small screen GPS nav unit.

Once a route has been chosen, CoPilot is on par with any good GPS nav system with 2D and 3D map presentation capabilities (Fig. 3). It has night or day options, whereas the Samsung Q1B, like many GPS nav systems, lacks the necessary hardware to automatically detect low light situations.

The key difference between CoPilot and most of the alternatives was the touch screen interface operation was a breeze. Functionally, CoPilot matches or exceeds most GPS nav systems on the market. It handled rerouting and voice output without a hitch.

Recommendations CoPilot is what you want if your UMPC or MID device will be your navigation system. I highly recommend it. The software alone is only $99. Go for the Bluetooth GPS module if you do not have a built-in GPS unit already. That bundle is $199. The mobile edition comes with a 2-Gbyte micro-SD memory card with a MiniSD and SD adapter. I used the CD laptop version to install it on the Samsung Q1B.

For those looking for trucking support there is a CoPilot Truck version. It can handle routing restrictions such as height, hazmat limitations and toll avoidance.

ALK Industries
www.alk.com

Samsung
www.samsung.com

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form. 

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below. 

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.  

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence. 

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!