Bus Repeaters Expand Use Of Popular Inter-IC Bus

March 17, 2003

Rather than accept that it has reached the end of its life, the venerable I²C bus has regained momentum as bus repeaters extend its capabilities.

Dave Bursky

Rather than accept that it has reached the end of its life, the venerable I²C bus has regained momentum as bus repeaters extend its capabilities.

Continued interest in the decades-old serial inter-IC bus (I²C) prompted its creator, Royal Philips Electronics, to develop a family of bus repeaters that can double the number of devices able to reside on the same bus system (from 20 to 30 devices up to 40 to 60 devices). With the expanded use of the I²C as a maintenance and control bus, such as the SMBus in computing, telecommunications, and networking systems, these repeater chips will let designers build larger I²C systems than currently possible. The chips will also permit the hot-swapping of I²C cards into an active system.

Three repeater chips will initially be offered: the PCA9515, 9516, and 9518. The PCA9515 is a single repeater in an eight-lead package. It will support up to 800 pF of capacitive loading by splitting the bus into two segments. Both the 9516 and 9518 contain four repeaters, each with individual enable pins. These chips can be used like a hub, enabling the main I²C bus to send signals to four downstream I²C buses.

Available in a 16-lead package, the 9516 is limited to the four downstream ports. The 9518 comes in a larger 20-lead package. Its expansion interface allows multiple repeaters to be concatenated, so an almost unlimited number of bus segments can be added. The hub device includes bidirectional I²C drivers that isolate the bus capacitance on each segment. The hubs are multimaster-capable, which means that the repeater is transparent to bus arbitration and contention protocols. They have only one repeater delay between segments.

All three devices allow voltage translation, with either 3.3 or 5 V on any of the I²C sub-branches. The repeaters are available in both SO and space-saving TSSOP packages. The PCA9515, 9516, and 9518 cost $0.78, $1.08, and $1.20, respectively, in 10,000-unit lots. An evaluation board connects to a PC's parallel port and includes a simple to use graphical user interface. Samples and production quantities are immediately available.

Philips Semiconductors
www.philipslogic.com/i2c/
(408) 474-5100

See associated figure

About the Author

Dave Bursky | Technologist

Dave Bursky, the founder of New Ideas in Communications, a publication website featuring the blog column Chipnastics – the Art and Science of Chip Design. He is also president of PRN Engineering, a technical writing and market consulting company. Prior to these organizations, he spent about a dozen years as a contributing editor to Chip Design magazine. Concurrent with Chip Design, he was also the technical editorial manager at Maxim Integrated Products, and prior to Maxim, Dave spent over 35 years working as an engineer for the U.S. Army Electronics Command and an editor with Electronic Design Magazine.