Test & Measurement: 14-Bit, Two-Channel Comm Analyzer Card Works At 105 Msamples/s

April 26, 2004
Two synchronous channels sample simultaneously at 105 Msamples/s on the 14-bit (12 equivalent number of bits) Compuscope 14105 Comm Analyzer card. Up to 512 Msamples/channel and 1 Gsample of total acquisition memory are available. The card, designed...

Two synchronous channels sample simultaneously at 105 Msamples/s on the 14-bit (12 equivalent number of bits) Compuscope 14105 Comm Analyzer card. Up to 512 Msamples/channel and 1 Gsample of total acquisition memory are available. The card, designed for communications testing, features a 60-kHz to 270-MHz bandwidth and transformer-coupled 50-(omega) input-impedance inputs. It can use the 32-bit, 66-MHz PC to transfer 200 Mbytes/s. Software-development kits are available for C/C++, Matlab, and LabView. Price starts at $5995 for the base memory model (8 Msamples/channel and 16 Msamples of total on-board memory).

Gage Applied Technologies Inc. www.gage-applied.com (514) 633-7007

About the Author

Roger Allan

Roger Allan is an electronics journalism veteran, and served as Electronic Design's Executive Editor for 15 of those years. He has covered just about every technology beat from semiconductors, components, packaging and power devices, to communications, test and measurement, automotive electronics, robotics, medical electronics, military electronics, robotics, and industrial electronics. His specialties include MEMS and nanoelectronics technologies. He is a contributor to the McGraw Hill Annual Encyclopedia of Science and Technology. He is also a Life Senior Member of the IEEE and holds a BSEE from New York University's School of Engineering and Science. Roger has worked for major electronics magazines besides Electronic Design, including the IEEE Spectrum, Electronics, EDN, Electronic Products, and the British New Scientist. He also has working experience in the electronics industry as a design engineer in filters, power supplies and control systems.

After his retirement from Electronic Design Magazine, He has been extensively contributing articles for Penton’s Electronic Design, Power Electronics Technology, Energy Efficiency and Technology (EE&T) and Microwaves RF Magazine, covering all of the aforementioned electronics segments as well as energy efficiency, harvesting and related technologies. He has also contributed articles to other electronics technology magazines worldwide.

He is a “jack of all trades and a master in leading-edge technologies” like MEMS, nanolectronics, autonomous vehicles, artificial intelligence, military electronics, biometrics, implantable medical devices, and energy harvesting and related technologies.

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!