Portable R&S Scope Rider offers performance of lab instrument
Munich, Germany. Rohde & Schwarz has announced its first handheld oscilloscope with the functionality and touch and feel of a state-of-the-art lab oscilloscope. The R&S Scope Rider combines five instruments in a compact format, and its rugged design makes it suitable for mobile installation and maintenance work. The instrument features isolated input and communications interfaces. It meets CAT IV standards and can carry out measurements on low voltage installation sources up to 600 V.
The R&S Scope Rider can serve in the lab and in the field. It offers an acquisition rate of 50,000 waveforms per second, a 10-bit A/D converter developed by Rohde & Schwarz, and a maximum bandwidth of 500 MHz.
The R&S Scope Rider integrates five functions to offer a level of versatility not found in other instruments. It features a precise digital trigger system, 33 automatic measurement functions, mask test, and XY diagram mode. Plus, the R&S Scope Rider can function as a logic analyzer with eight additional digital channels, as a protocol analyzer with trigger and decoding capability, and as a data logger and digital multimeter.
The handheld oscilloscope is equipped with a large-format capacitive touchscreen, allowing it to be operated as intuitively as a tablet PC. It also features large buttons for use with gloves and a practical multifunction wheel for convenient parameter adjustment. Well prepared for harsh environments, the R&S Scope Rider’s IP51-certified housing offers protection from environmental hazards such as dust and dripping water. The handheld oscilloscope has passed all mechanical load tests in line with military standards. The fully isolated instrument offers maximum safety and meets the measurement category requirements defined in IEC 61010-1 for CAT IV up to 600 V and for CAT III up to 1000 V.
In addition to a microSD card, the instrument features USB and Ethernet ports for uncomplicated storage and transfer of measurement data. The R&S Scope Rider also has an integrated WLAN interface. This can be configured as a hotspot to allow the instrument to be remotely controlled via a smartphone, tablet PC, or laptop. A simple web browser on the mobile device is all that is required. There is no need for additional software or apps.
With more than four hours of battery runtime, the 2.4-kg R&S Scope Rider offers users a high degree of flexibility during installation, maintenance, and emergency situations. The new handheld oscilloscope goes beyond traditional electrical engineering to serve a broad range of industries. Technicians and specialists can also use it to gain a clear understanding of the condition of electrical installations, systems, and components. For everything from measurement data acquisition in industrial and manufacturing settings to repairing shipboard electrical drives and carrying out vehicle test drive analyses, the R&S Scope Rider is suited to the needs of such tasks.
The R&S Scope Rider is available as a four-channel or a two-channel instrument, the latter with a digital multimeter, with bandwidths of 60 MHz, 100 MHz, 200 MHz, 350 MHz, and 500 MHz. There will be trigger and decoding options available for I2C, SPI, UART, RS-232, RS-422, and RS-485 at the time of market introduction.
At the embedded world 2016 international trade fair in Nuremberg from February 23 to 25, 2016, Rohde & Schwarz will give the first public demonstration of its R&S Scope Rider.
The R&S Scope Rider enhances the company’s Value Instruments portfolio of attractively priced, high-quality T&M equipment and will be available from Rohde & Schwarz and selected distribution partners under the product designation R&S RTH10xx.
