Component Specifier: Switches/Relays

Sept. 20, 2004
SWITCHES/RELAYS ...
SWITCHES/RELAYSTYPE/ModelFeaturesP&A SourceSWITCHESSPDT SWITCH
82 SW series
Single-pole/double-throw (SPDT) switch in a 0.25-in. diameter trimmer package with a 0.14-in. profile and three-pin design; environmentally sealed; 200-cycle rotational life; packaging options include boxes, tubes, and tape and reel$0.69 in lots of 1000; three weeks or less AROBI Technologies
(714) 447-2757
www.bitechnologies.com
DOOR SWITCH
D3D
Uses a standard, removable crimp connector for wiring ease; available in plunger and lever configurations; gold crossbar contacts and drip/spill-resistant sealing in the plunger style ensure reliable performance; wiping "rocker" contacts offer silent operation and virtually eliminate the possibility of arcingStart at $1.31 each; available from stockOmron Electronics LLC
(800) 55-OMRON
www.info.omron.com
CODED OUTPUT SWITCH
CO8
Meets six-sigma quality standards; 9- by 9-mm platform; available in Hex, Gray, and custom codes; features "Click With A Kick" tactile feedback; available in surface-mount device and through-hole technology styles$1.50 in volume; four weeks AROElma Electronic
(510) 656-3400
www.elma.com
SILENT ACTUATION PUSHBUTTON SWITCH
KP01 series
Single-pole/single-throw momentary switch available in 12-, 15-, and 17.4-mm cap sizes; tactile and nontactile actuation options; includes a built-in red-green LED; snap-in stand-off provides secure pc-board mounting and alignment; epoxy-sealed terminals lock out flux, dust, and other contaminants; rated at 100 mA maximum at 12 V dc; 5 million-actuation mechanical and electrical life$5.24 in 5000-unit lots; stock to six weeksNKK Switches
(480) 991-0942
www.nkkswitches.com
RELAYSPOWER RELAY
FTR-K3
1Make (1 Form A) relay; 780-mW operating power; 20-A maximum load at 250 V ac; operates from ­40°C to 60°C; measures 30.1 by 15.7 by 23.3 mm; 8-mm creepage distance and minimum 9.5-mm creepage distance between coil and contacts; 2 million-operation mechanical life and 100,000-operation electrical life at rated load; meets UL, CSA, VDE (pending), and CQC agency approvals$1.10 each in 100,000-unit lots; 12 weeksFujitsu Components America
(800) 380-0059
www.fcai.fujitsu.com
HIGH-LOAD RELAY
WJ151
Rated at 20 A at 277 V ac and 0.5 hp at 125 V ac; UL recognized; single-pole/single-throw, single-pole/double-throw, double-pole/double-throw, triple-pole/double-throw, and quadruple-pole/double-throw contact configurations; optional panel mount flange and a choice of PC pins or solder lugs that fit many relay-socket styles; options include coil voltage of 6 V dc to 100 V dc and 6 V ac to 220 V, LED indication, and sealed construction$1.91 to $7.00 each per 1000 units; four to six weeks CIT Relay & Switch
(763) 535-2339
www.citrelay.com
SOLID-STATE DIP RELAYS
ZD20CF and ZD24CC
Six-pin dual-inline package (DIP) relays; the ZD20CF is a 2-A, 60-V dc relay with short-circuit/overload protection up to 33 V dc; the ZD24CC is a 500-mA, 80-V dc relay with short-circuit/overload protection up to 60 V dc and trip status/feedback; both offer optical isolation as well as low off-state leakage current$18 each in quantities of 10,000; 10 weeksTeledyne Relays
(800) 284-7007
www.teledynerelays.com
BALL-GRID-ARRAY (BGA) REED RELAY
B41 series
Form A, planar BGA package requires no slot or hole in the pc board for mounting; allows for shorter RF paths in a controlled 50-(omega) environment to minimize signal attenuation; each of the four independent channels has an RF insertion loss (­3-dB rolloff point) of >8 GHz; combination of coaxial and magnetic shielding reduces adjacent closed interchannel RF crosstalk to ­40 dB at 1-GHz test signal$62.15 (about $15 per channel) in 1000-unit lots; stock to six weeksCoto Technology
(401) 943-2686
www.cotorelay.com

Sponsored Recommendations

Near- and Far-Field Measurements

April 16, 2024
In this comprehensive application note, we delve into the methods of measuring the transmission (or reception) pattern, a key determinant of antenna gain, using a vector network...

DigiKey Factory Tomorrow Season 3: Sustainable Manufacturing

April 16, 2024
Industry 4.0 is helping manufacturers develop and integrate technologies such as AI, edge computing and connectivity for the factories of tomorrow. Learn more at DigiKey today...

Connectivity – The Backbone of Sustainable Automation

April 16, 2024
Advanced interfaces for signals, data, and electrical power are essential. They help save resources and costs when networking production equipment.

Empowered by Cutting-Edge Automation Technology: The Sustainable Journey

April 16, 2024
Advanced automation is key to efficient production and is a powerful tool for optimizing infrastructure and processes in terms of sustainability.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!