Having a Rugged Pi Day

March 14, 2022

It's 3-14, which is also known as Pi Day. And to help ring in the occasion, Curtiss-Wright’s rugged mission computer, targeted at applications such as avionics and UAVs, is built around a Raspberry Pi.

William G. Wong

Related To: Electronic Design

This article is part of TechXchange: Raspberry Pi

What you’ll learn:

What is a Raspberry Pi Compute Module?
How to use a Raspberry Pi in a rugged environment.

Happy Pi Day!

Its March 14, or 3-14, also known as Pi Day. It’s when my alma mater, Georgia Tech, holds the Pi Mile Race, essentially a 5K race down the streets of Atlanta. This year is the 50^th annual race.

In 2022, we also can celebrate Curtiss-Wright’s release of the Parvus DuraCOR Pi (Fig. 1). This little box houses a Raspberry Pi Compute Module 4. The compute modules provide a more rugged and compact solution than the conventional Raspberry Pi platforms, which are often oriented toward prototyping. Many developers have used these platforms in products, but these tend to go into environments that aren’t as demanding, such as homes and offices.

1. The Parvus DuraCOR Pi isn’t much larger than a standard Raspberry Pi, but it’s much more rugged.

Raspberry Pi compute modules generally find homes in industrial applications. Sfera Labs’ Iono Pi Max is a programmable logic controller (PLC) that’s powered by a Raspberry Pi computer module. It’s designed for industrial and production line applications.

The Parvus DuraCOR Pi could be used in those environments, especially when the device needs to be in the field. All of the other components are designed to handle rugged environments that are wet, dirty, and messy.

The Raspberry Pi Compute Module 4 integrates a Broadcom 1.5-GHz BCM2711 with a quad-core Arm Cortex-A72 compute complex. It has MIPI camera interfaces, display interface, Gigabit Ethernet with IEEE 1588 support, 2.4- and 5.0-GHz IEEE 802.11 b/g/n/ac Wi-Fi support, and Bluetooth 5.0 and BLE support. Any of these external interfaces can be used or disabled on the Parvus DuraCOR Pi.

The module has up to 32 GB of eMMC and up to 8 GB of LPDDR4-3200 SDRAM with ECC support. The Curtiss-Wright platform utilizes a CM410832 compute module with 1-GB SDRAM and 32 GB of eMMC flash.

The DuraCOR family is designed to be stackable, so it’s possible to add a Raspberry Pi “hat” peripheral adapter (Fig. 2). This increases the height of the unit but retains the sealed, rugged nature of the system. A stackable variant takes advantage of the single-lane, PCI Express (PCIe) interface provided by the compute module, allowing a Mini-PCIe socket to be used for expansion. This could house a peripheral interface or a solid-state disk.

2. The DuraCOR Pi is able to gain a hat by adding an extra, rugged case “ring” that can alternatively include a MiniPCIe card instead.

The ultra-small-form-factor (USFF) DuraCOR Pi uses MIL-STD-38999 connectors. Its corrosion-resistant, IP67, aluminum-alloy, black anodized case meets MIL-A-8625. The overall system is designed to meet MIL-STD-810, DO-160, and MIL-STD-461 requirements. The DuraCOR consists of larger, small-form-factor (SFF), and standard-size platforms (Fig. 3) for both compute and networking. Network switches support Ethernet.

3. The DuraCOR Pi is at the lower end of the DuraCOR compute family. The network components are rugged Ethernet switches.

The family targets very rugged applications, such as avionics as well as manned and unmanned vehicles. The USFF can fit into small drones that are often prototyped with a conventional Raspberry Pi. However, it’s not practical to ship real product without moving to more rugged solutions like the DuraCOR Pi. The USFF unit can be used in standalone deployments or as part of a distributed network solution.

Read more articles like this at TechXchange: Raspberry Pi