The SSTU32864 is a 25-bit 1:1 or 14-bit 1:2 configurable registered buffer designed for 1.7- to 1.9-V VDD operation at clock frequencies of up to 450 MHz. All clock and data inputs are compatible with the JEDEC standard for SSTL_18. The control inputs are LVCMOS. All 1.8-V, CMOS-driver outputs are optimized to drive the DDR2 dual-inline memory module load. Operating from a differential clock (CK and CK—), the buffer locks in data at the crossing point when CK goes HIGH and CK— goes LOW. The device supports low-power standby operation. When the reset input is LOW, the differential input receivers are disabled, and undriven (floating) data, clock, and reference voltage (VREF) inputs are allowed. The buffer is housed in a 96-ball, 13.5- by 5.5-mm, low-profile, fine-pitch ball-grid-array package. In quantities of 10,000 units, the buffer is priced at $4.35 each.