40-V MOSFETs Help with High-Frequency DC-DC Power Conversion

The trench power MOSFETs balance on-state resistance, output charge, and gate charge to cut conduction and switching losses alike.

A new series of 40-V switching-optimized power MOSFETs are poised to driving up the efficiency of high-frequency DC-DC power conversion in AI servers, data centers, and telecom infrastructure.

The OptiMOS 7 40 V series introduced by Infineon Technologies aims to help engineers improve efficiency and power density in space-constrained systems. They target both low-voltage, secondary-side stages of high-voltage intermediate bus converters (IBCs) in emerging 800-V DC architectures and IBCs in more traditional 48-V architectures, with switching frequencies of over 1 MHz supported in suitable topologies.

“With the OptiMOS 7 40 V, we give designers a MOSFET that cuts conduction and switching losses at the same time, so they can raise power density in the very limited space of an AI server,” explained Richard Kuncic, head of Infineon's power switches business line. “It fits the secondary side of emerging 800-V DC architectures as well as today's 48-V designs, which lets our customers move to the next architecture at their own pace."

To cut down on both conduction and switching losses, the trench MOSFETs balance on-state resistance (RDS(on)), output charge (Qoss) and gate charge (Qg).

When comparing a source-down OptiMOS 7 device with its OptiMOS 6 predecessor at a gate-source voltage of 4.5 V, Infineon said it reduced the maximum RDS(on) by up to 33%, while the figures of merit for output charge and gate charge are each reduced by up to 35%. Optimized for 5-V gate drive, the series is rated for junction temperatures up to 175°C.

The IQE010N04LM7CG and IQE010N04LM7CGSC come in PQFN source-down center-gate packages measuring 3.3 mm2. Both feature a maximum RDS(on) of 1.0 mΩ at a gate-source voltage of 10 V. 

The ISCH65N04LM7SC, ISCH69N04LM7SC, and ISC011N04LM7SC are packed into PQFN 5- × 6-mm drain-down packages that feature dual-side cooling to handle the increasingly hot conditions inside AI servers. These three power MOSFETs come with maximum RDS(on) values of 0.65, 0.69, and 1.1 mΩ, respectively, at a gate-source voltage of 10 V, according to the company.

About the Author

James Morra

James Morra

Senior Editor

James Morra is the senior editor for Electronic Design, covering the semiconductor industry and new technology trends, with a focus on power electronics and power management. He also reports on the business behind electrical engineering, including the electronics supply chain. He joined Electronic Design in 2015 and is based in Chicago, Illinois.