Celebrating 71 Years of Ideas of Design

Electronic Design’s Ideas of Design began back in February 1955.

What you’ll learn:

  • What are Ideas for Design?
  • Why has it been around this long?
  • What’s new this year.

Ok, I admit I missed the 70th anniversary of Electronic Design’s Ideas for Design (IFD), but I was busy. Seems like a good excuse. Besides, 71 is much more interesting. According to Wikipedia, 71 is a regular prime, a Ramanujan prime, a Higgs prime, and a good prime. It turns out that IFDs are just a bit older than me, too, but only by a couple months. It took me a little while before I could catch up reading IFDs, even though I’ve been reading Electronic Design for a very long time. Seems I have been writing for it for a very long time as well.

In any case, if you haven’t seen them before, IFDs are short, technical articles, often like tiny app notes that focus on a basic task or design approach. There used to be one to three of these in each print issue, and we’ve continued with them when we went online-only. We don’t have one in every Electronic Design Weekly issue, but they pop up on a regular basis.

The very first Ideas for Design was created by Milton Sol Weiss with Hycon Manufacturing Company (Fig. 1). The article was titled “Human-Engineered Oscilloscope Panel.” Keep in mind that this was back when vacuum tubes were king and programming meant using Fortran, which started the same year as Electronic Design in 1953.

Most of the initial IFDs were like this, as well as those focusing on analog and amplifiers in addition to power and power supplies. Digital tech was starting to show up. Minicomputers were big in the early 1970s, with microprocessors like the Zilog Z80 showing up in the late 1970s. All of these were covered by Electronic Design and the IFDs followed suit with software being part of the mix (Fig. 2).

Of course, times change and so did IFDs. Power and analog articles remain the topic for the bulk of the IFDs we receive these days. However, software tips and even FPGA-based IFDs are also in the mix. All of these were contributed by Electronic Design readers.

Seeing one or two IFDs on occasion is fun, but trying to find many of them can be a challenge. This is why we’ve been putting together Ideas for Design volumes that collect a number of these articles into a single, downloadable PDF file. We will be adding to the collection as we have decades worth of IFDs.

In the past, there were print versions of these volumes. If you have one, let us know — it’s one thing we don’t have in the Electronic Design archives. You can always see the latest IFD using this link.

If you have time, check out our Inside Electronics podcast. The other editors and I recorded an episode talking about IFDs and how they were used and changed over the years. You can leave a comment about your interest in IFDs as well.

P.S. I did remember Electronic Design’s 70th anniversary.

More Ideas for Design

ID 31447604, 2757917, 105197406, 5150286 © Dreamstime.com
EDW 71tst Ideas for Design
Check out the latest stories, videos, and podcasts from the week of Nov. 16, 2026.
Check out our most recently published IFDs.
Our collection of Ideas for Design from our readers.
Check out this collection of great Ideas for Design that have stood the test of time.
Check out the latest collection of design nuggets for engineers and developers.
Members Only
Download the Ideas for Design Vol. 3 eBook.
This is the first Ideas for Design originally published in Electronic Design February 1955.

About the Author

William G. Wong

William G. Wong

Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form. 

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below. 

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.  

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence. 

Sign up for our eNewsletters
Get the latest news and updates

Comment About the Article

To join the conversation, and become an exclusive member of Electronic Design, create an account today!