Electronic Design Weekly: Nov. 16, 2026 - Ideas for Design
In This Issue
- Editorial: Celebrating 71 Years of Ideas of Design
- Featured Content
- New Products
- Focus On: Ideas for Design
- Multimedia on ElectronicDesign
- Editor's Choice: From the ElectronicDesign Archives
- Illustrated Engineering
- New in Electronic Design's Member Library
- Editor's Weekly Picks
- More Electronic Design Weekly
Welcome to Electronic Design's weekly publication where you can find the latest articles, videos, and podcasts. Think of it as Electronic Design magazine where you can read about the latest technologies and products.
Check back as we add more content is added every day. You can sign up for our daily newsletter to see the latest articles as they're posted. Check out the latest newsletters. You can also check out archived versions of Electronic Design Weekly.
Editorial: Celebrating 71 Years of Ideas of Design
Ok, I admit I missed the 70th anniversary of Electronic Design’s Ideas for Design (IFD) but I was busy. Seems like a good excuse. Besides, 71 is much more interesting. According to Wikipedia, 71 is a regular prime, a Ramanujan prime, a Higgs prime, and a good prime. It turns out that IFDs are just a bit older than me, too, but only by a couple months. It took me a little while before I could catch up reading IFDs, even though I've been reading Electronic Design for a very long time. Seems I have been writing for it for a very long time as well.
In any case, if you haven't seen them before, IFDs are short, technical articles, often like tiny app notes focusing on a basic task or design approach. There used to be one to three of these in each print issue and we continued with them when we went online-only. We do not have one in every Electronic Design Weekly issue, but they pop up on a regular basis.
Read the rest of this editorial.
promo_id_48823543__strixcode__dreamstime
promo_id_5883043__helder_almeida__dreamstime
datacenter_dreamstime_463844545
promo
promo
roboticarm_dreamstime_342278242
data analysis
id_278502__marcello_mura__dreamstime
ed_interest_new_hall_effect_eye_candyweb
promo_pmdsemiconductorcoverimage
UCIe.mem
dreamstime_lupoalb68_24255958
promo__71__31447604_2757917_105197406_5150286__dre
Globe and video wallEditor's Choice: From the ElectronicDesign Archives
These articles were chosen by the editors at ElectronicDesign that complement the new articles above. They’re included in our regular newsletters.
dreamstime_funtapp_112952821_promo
promo1920x1080
id_23149447__joe_sohm__id_160236318__tea__dreamsti
dreamstime_yurz_1670502
ed_interestwaterbug_eyecandy
maker_dreamstime_l_32216338
oled_dreamstime_l_162798257Last Cartoon for Engineering on Friday?
Yes, quite possibly the end of the series here at Electronic Design. But... I did put in a poll about what to do next to the article for the 'toon. I also added a survery where YOU can share your thoughts. Check it out here.
This one is an apt end. Hand-drawn art about DIY projects I really built for my son. You can see videos and pictures of the builds and all the inspiration behind this one after this link.
In case this really is the end, thanks for reading all this time!
Onward.
Cabe
From AndyT's Inventors Comics Collection
New in Electronic Design's Member Library
Are you an Electronic Design member? It’s free and you get access to content like our latest eBooks and editorial webinars. You can also provide feedback about articles.
Ideas for Design Vol 3
Reading library bookAndy's Picks from Around the Web
Andy's Video Pick of the Week
This video is a couple of years old, but has some interesting insight into the design of electric mining trucks.
There's mention of the "infinity train", which was sadly canceled late last year for "violating physics", but I think it merely got ahead of itself on battery tech (GM's LMR battery tech would be a good play here, as would lightweighting ore cars because the ratio of laden to unladen weight makes it or breaks it).
I'm not buying the rolling resistance or aerodynamics rationale offered by one Youtube channel and then prolferated - apart from skin friction, drag can be taken to almost zero with faired ore cars.
If there's a reader out there who worked for Fortescue or Williams on these, please contact me.
Electronica 2026About the Author
William G. WongWilliam G. Wong
Senior Content Director - Electronic Design and Microwaves & RF
I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.
You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.
Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.
You can visit my social media via these links:
- AltEmbedded on Electronic Design
- Bill Wong on Facebook
- @AltEmbedded on Twitter
- Bill Wong on LinkedIn
I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.
I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.
Roger Engelke Jr.Roger Engelke Jr.
Managing Editor - Electronic Design and Microwaves & RF
Roger manages the websites and print issues for Electronic Design and Microwaves &RF.
Cabe AtwellCabe Atwell
Technology Editor, Electronic Design
Cabe is a Technology Editor for Electronic Design.
Engineer, Machinist, Cartoonist, Maker, Writer. A graduate Electrical Engineer actively plying his expertise in the industry and at his company, Gunhead. When not designing/building, he creates a steady torrent of projects and content in the media world. Many of his projects and articles are online at element14 & SolidSmack, industry-focused work at EETimes & EDN, and offbeat articles at Make Magazine. Currently, you can find him hosting webinars and contributing to Electronic Design and Machine Design.
Cabe is an electrical engineer, design consultant and author with 25 years’ experience. His most recent book is “Essential 555 IC: Design, Configure, and Create Clever Circuits”
Cabe writes the Engineering Life & Engineering on Friday blog on Electronic Design.
See Cabe's cartoons & comic strips here.
James MorraJames Morra
Senior Editor
James Morra is the senior editor for Electronic Design, covering the semiconductor industry and new technology trends, with a focus on power electronics and power management. He also reports on the business behind electrical engineering, including the electronics supply chain. He joined Electronic Design in 2015 and is based in Chicago, Illinois.
Andy TurudicAndy Turudic
Technology Editor, Electronic Design
Andy Turudic is a Technology Editor for Electronic Design Magazine, primarily covering Analog and Mixed-Signal circuits and devices and also is Editor of ED's bi-weekly Automotive Electronics newsletter.
He holds a Bachelor's in EE from the University of Windsor (Ontario Canada) and has been involved in electronics, semiconductors, and gearhead stuff, for a bit over a half century. Andy also enjoys teaching his engineerlings at Portland Community College as a part-time professor in their EET program.
"AndyT" brings his multidisciplinary engineering experience from companies that include National Semiconductor (now Texas Instruments), Altera (Intel), Agere, Zarlink, TriQuint,(now Qorvo), SW Bell (managing a research team at Bellcore, Bell Labs and Rockwell Science Center), Bell-Northern Research, and Northern Telecom.
After hours, when he's not working on the latest invention to add to his portfolio of 16 issued US patents, or on his DARPA Challenge drone entry, he's lending advice and experience to the electric vehicle conversion community from his mountain lair in the Pacific Northwet[sic].
AndyT's engineering blog, "Nonlinearities," publishes the 1st and 3rd Tuesday of each month. Andy's OpEd may appear at other times, with fair warning given by the Vu meter pic. His cartoon series, "Inventors", appears each week in Electronic Design Weekly.
Related
Electronica 2026Comment About the Article
To join the conversation, and become an exclusive member of Electronic Design, create an account today!
Leaders LogoLeaders relevant to this article:
















