Energy Harvesting Promo 5f15fa784d7ac

TechXchange: Energy Harvesting

July 20, 2020

From triboelectricity to rust, these articles highlight multiple aspects of energy harvesting.

Energy harvesting is an attractive option for providing long-term power, and at low or even no cost, for circuits and systems, especially when battery replacement is impractical. However, as with almost all design options, it's simple in concept but brings issues, tradeoffs, and constraints in implementation. Despite its initial attractiveness, energy harvesting is not a “something for nothing” design option. However, it may be a “something for very little” option, or perhaps it's the only feasible option for some challenging installations.

Energy Harvesting Design

Looking to incorporate energy harvesting in your design? Check out some of these articles.

11 Myths About Energy Harvesting

11 Myths About Energy Harvesting

Is energy harvesting expensive? Hard to implement? We’ll dispel some of the myths surrounding the technology.

Running Op Amps on a Single Cell

Running Op Amps on a Single Cell

Few operational amplifiers will work at 0.9 V, the voltage of a discharged alkaline cell. Here are some of those exceptions.

Harvest Energy from RF Sources

Harvest Energy from RF Sources

Growing reliance on electronic devices in industrial and commercial applications is fueling the use of RF energy harvesting as a source of power.

RFID Approach Works Without ICs

A chipless RFID approach offers a cost-effective alternative to bar-code readers.

Bringing High Power Density to Energy Harvesting

A free-standing magnetic field energy harvester (FSMFEH) can provide isolation and effectively power remote sensors in high-voltage grid and busbar applications.

Capacitors and Current-Sense Amps: Unsung Energy-Harvesting Heroes

Sponsored Content

Capacitors and Current-Sense Amps: Unsung Energy-Harvesting Heroes

Sponsored by Digi-Key and ON Semiconductor/Kemet: These components, typically built to withstand tough conditions, are critical for maintaining the reliability and long-term life...

Triboelectric Energy Harvesting Finally Gets Detailed Analytical Model

Triboelectric Energy Harvesting Finally Gets Detailed Analytical Model

Friction-generated energy can be captured and harvested—a new analytical model incorporates material surfaces, position, and motion that results in energy output.

Energy Harvesting Powers Wireless Sensor Networks In Industrial Apps

Advancements in low-power and reliable wireless communications, together with improvements in sensor and energy harvesting technologies is making it more practical and more efficient...

Back to Table of Contents

Energy Harvesting Research

Many energy harvesting designs and implementations are cutting edge. Some of these are still in the labs but may be available in the future.

Wood as a Transducer for Energy Harvesting of Low-Grade Heat?

When infused with a suitable electrolyte, chemically processed wood can function as an energy-harvesting transducer using low-grade (low temperature) heat as the energy source...

These 5 IoT Energy-Harvesting Options Stand Out “in the Field”

These 5 IoT Energy-Harvesting Options Stand Out “in the Field”

As embedded systems and IoT devices push more into applications in remote locations, designers are looking at alternative means to portably power them.

Liquid-Metal Triboelectric Nanogenerator Harvests Body Motion

Researchers developed a friction-based transducer comprised of liquid metal and a polymer-layer sandwich that can harvest energy of low-frequency motion, such as from a body.

Charge-Storing Threads Turn Fabric into Supercapacitor

Researchers combined conductive threads with a polymer film to create a flexible mesh of electrodes on a textile backing that functions as a supercapacitor.

Piezo-Based Energy Harvesting for Medical Implants May Transcend Alternative Approaches

Piezo-Based Energy Harvesting for Medical Implants May Transcend Alternative Approaches

Researchers developed a prototype energy-harvesting transducer for medical implants, such as pacemakers, using normal motion of the heart-related blood vessels to generate critical...

Are You Kidding—Harvest Power from Rust?

An intermittent saline solution flowing across a precisely engineered, ultra-thin layer of rust can generate small but meaningful amounts of power.

Test & Measurement

Implantable Blood-Flow Sensor is Wireless, Battery-Free, and Biodegradable

Researchers developed a self-powered, in-situ, biodegradable sensor of fluid flow in blood vessels that combines a capacitive pressure transducer with an RF antenna.

Electronics Meets Textiles in Various Innovative Guises

Electronics Meets Textiles in an Array of Innovative Guises

Textiles and electronics are forming mutually beneficial relationships, with components and functions such as optical devices and flexible sensors embedded in fabric.

Nanotube Shirts for Energy Harvesting?

Nanotube Shirts for Energy Harvesting?

By stretching and relaxing tightly twisted yarns made of carbon-based nanotube fibers, researchers devised a way to harvest and store the motion as electrical energy.

Harvesting Power Using Triboelectric Generators

Researchers at Georgia Institute of Technology are harvesting energy using triboelectric effect technology.

With the triboelectric nanogenerator and twostage power management system developed by the Georgia Institute of Technology tapping your finger can generate enough power to operate a scientific calculator Image courtesy of Zhong Lin Wang Georgia Tech

Power Unit Turns People into Generators

Georgia Tech researchers have developed a power management system that could allow wearables to harvest energy from running, walking, or tapping your fingers.

ed_interest_rf_energyharvesting_sr_rectifier_eye_c

Energy Harvesting

Advanced Rectifier Overcomes Challenges of Harvesting Low-Level RF

A tailored nanoscale “spin rectifier” is optimized for low-level energy harvesting in specific RF bands.

ed_interest_skin_energy_harvesting_biosensing_prom

"Skin is In": Non-Invasive Biosensing and Energy Harvesting

Innovative fingertip biofuel cells and flexible thermoelectric devices enable non-invasive biomarker sensing and energy harvesting from human skin.

ed_interest_textileharvesting_eyecandy1

Textile-Based Energy Harvesting: The Next Big Thing (Again)?

The quest continues to have your shirt provide harvestable energy. Two novel methodologies attempt to find the solution, one implementing conductive polymers and the other using...

Back to Table of Contents

Using Energy Harvesting

Here are some examples of energy harvesting uses.

Componentized Direct-Drive Electric Generator Targets New and Refurbished Wind Turbines

Now becoming available for large wind-turbine systems are less expensive, lightweight, and higher-performing alternatives to the low-speed, rare-earth permanent-magnet direct-...

Energy-Harvesting and Regeneration Embraced by Auto Industry

Energy Harvesting and Regeneration Embraced by Auto Industry

Research into regenerative braking, kinetic and vibrational energy recovery, and the triboelectric effect continues to advance, with some moving into mainstream design.

Q&A: Spansion’s Tom Sparkman Talks About Energy Harvesting

The billions of sensors at the heart of the countless amounts of smart connected devices rely on batteries for power, which are costly, toxic to the environment, and require significant...

Smart Car harvest-491065685-promo

Smart Cars Can Employ Energy-Harvesting Techniques

Designers are eyeing the latest methods in energy harvesting to recover wasted heat, motion, vibration, and friction losses, and recoup them into useful electrical energy from...

Back to Table of Contents

Energy Harvesting Webinars

These energy harvesting webinars are available now.

Back to Table of Contents

Continue Reading

TechXchange: Energy Harvesting

"Skin is In": Non-Invasive Biosensing and Energy Harvesting

Sponsored Recommendations