Placing a Hat on the Raspberry Pi brings a myriad of additional capabilities for IoT applications. Here’s a roundup of the latest unique developments as of September 2023.
Continuous supply voltage via an uninterruptible power supply is crucial for a number of applications, but it can be tough to ensure at all times. This Idea for Design offers ...
AI has the potential to disrupt or eliminate up to 300 million full-time jobs, and there’s no path forward that promises ample work ahead for all. Here’s what you can do to prepare...
Testing a high-voltage battery? Building a battery-powered IoT device? Check out this installment of Products of the Week for the latest battery test systems to hit the market...
How did RISC-V transform from a student project into an architecture that’s being used by organizations, universities, and governments around the world? Let’s dive into the history...
One is defined as a converter’s rate output power, while the other is a measure of a signal’s power content versus frequency. This article makes further distinctions between the...
The RP2040—the first MCU from the Raspberry Pi Foundation—offers designers a high-power, small-form-factor option, while the Raspberry Pi 4 SBC runs a full operating system. What...
With a single-inductor, multiple-output (SIMO) converter, multiple voltages can be generated with just one energy-storage inductor, providing for a more compact power-supply architectur...
Sensors have become staples in design across the industry, impacting applications ranging from automotive to medical to the IoT. Here are some of the latest advances in the field...
Switched reluctance motors are tough, inexpensive to build, and don’t require rare-earth minerals, but they do pose some challenges for use in electric vehicles.
Hall-effect sensors are rising to the challenges of industrial and automotive systems, What are some common misconceptions regarding these magnetic-field sensors?
Wouldn’t it be great to not repeat the same amplifier application errors many new designers fall into? Read on to head off these common confusions and oversights.
This three-part series discusses how phase noise in general is modeled and simulated, and how RF component phase noise propagates through a PLL to determine its output phase noise...
555 timers may be over 50 years old, but they’re still driving the latest electronics to hit the market and will continue in the next-gen devices on the horizon. Read about the...
The latest motor architectures assist in curtailing or eliminating the economic, environmental, and geopolitical costs associated with the rare-earth materials used in most electric...
This article presents a practical approach to the layout design of mixed-signal boards, discussing component placement, board layering, and ground-plane considerations.
At the heart of every EV powertrain is a traction inverter, which ultimately impacts driving range and many other characteristics that EV makers care about.
Internal resistance is a key parameter to consider when selecting lithium-ions for your application. This article brings to light the specifics of ac internal resistance (ACIR...
Today, 48-V power systems are already helping improve the efficiency and performance of ICE and mild hybrid vehicles, but they will become an essential technology for tomorrow...
Researchers at the Illinois Institute of Technology and U.S. Department of Energy’s Argonne National Laboratory developed a lithium-air battery that could power an EV for as much...
How exactly is the correct inductance value chosen? Frederik Dostal looks at the considerations and what happens when selecting a current ripple that’s too high or too low.
Transitioning from a hardware-centric to a software-defined vehicle approach stems from the inability of flat E/E architectures to scale to the processing and data bandwidth requirement...
Can current-sensor ICs win out against the shunt resistor and other passive components? Check out some of the latest offerings on the market in this Products of the Week gallery...
Electric-vehicle makers are turning to 800-V systems to solve range and charging time issues that have created barriers with consumers and slowed the rollout of EVs. Here’s how...
When selecting an analog-to-digital (A/D) board, an external data acquisition system, or other measurement device, many parameters must be considered. Product characteristics ...
What's kept Li-metal batteries from fulfilling their potential to be a viable intermediate technology between today's Li-ion cells and the solid-state batteries expected to eventually...
What’s the state of the state for today’s calibration engineers? The cartoon series courtesy of Fluke Calibration takes a satirical snapshot of the current climate.
The new battery chemistry, based on abundant, inexpensive elements, promises to offer an inexpensive solution to storing renewable energy for times when the wind isn't blowing...
The CAN bus protocol is being phased out of the automotive industry in favor of single-pair Ethernet due to its increased data bandwidth, node efficiency, security, and more.